standards. Like most other nickel alloys, Monel 400 Pipe Fittings is usually hard to machine and will work harden. However, remarkable results can be acquired if you make the right choices for machining and tooling.
| Size | : | ½NB to 24”NB in Sch 10s, 40s, 80s, 160s, XXS. |
| Standards | : | ASTM / ASME SB 336 |
| Dimension | : | ANSI/ASME B16.9, B16.28, MSS-SP-43. |
| Thickness | : | from 2 to 40 mm. |
| Type | : | Seamless, Welded & Fabricated |
| Grade | : | Monel 400/UNS N04400/2.4360, Monel K-500/UNS N05500/2.4361 |
| STANDARD | UNS | BS | WERKSTOFF NR. | AFNOR | GOST | EN | JIS |
| Monel 400 | N04400 | NA 13 | 2.4360 | NU-30M | MHKMц 28-2,5-1,5 | NiCu30Fe | NW 4400 |
| Monel K500 | N05500 | - | 2.4375 | - | - | - | - |
| Grades | C | Fe | Ni | Si | Mn | Cu | Ti | S | Al |
| Monel 400 | 0.3 max | 1.0-2.5 | 63.0 min | 0.5 max | 2.0 max | 28.0-34.0 | - | 0.02 max | 0.50 max |
| Monel K500 | 0.25 max | 0.5 - 2 | 63.0 min | 0.5 max | 1.5 max | 27.0-33.0 | 0.35 - 0.85 | 0.010 max | 2.3 - 3.15 |
| Grade | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Monel 400 | 8.8 g/cm3 | 1350 °C (2460 °F) | Psi - 80,000 , MPa - 550 | Psi - 35,000 , MPa - 240 | 40 % |
| Monel K500 | 8.44 g/cm3 | 1350 °C (2460 °F) | Psi - 1,60,000 , MPa - 1100 | Psi - 1,15,000 , MPa - 790 | 20 % |
| Monel 400 Long, Short Stubend | Monel K500 Seamless, Welded 45°, 90° Elbows |
| Monel K500 Pipe End Cap | Monel 400 180° Returns Elbows |
| Monel 400 Collar | Monel K500 Reducing Cross, Equal Cross |
| Monel K500 Pipe Nipple, Swedge Nipple | Monel 400 Long Stub End |
| Monel 400 Barrel Nipple, Reducing Nipple | Monel K500 Concentric Reducer, Eccentric Reducer |
| Monel K500 Equal, Unequal Tee | Monel 400 Lap Joint Stub End |
| Monel 400 Piggable Bend, Long Radius Bend | Monel K500 Reducing Outlet Tee |
| Monel K500 Reducing Tee, Lateral Tee | Monel 400 Straight Tee and Crosses |
| Monel 400 45°, 90° Long Radius Elbow | Monel K500 45°, 90° Short Radius Elbow |
| Monel K500 180° Long, Short Radius Elbow | Monel 400 1D, 1.5D, 3D, 5D, Elbow |
| Monel 400 Coupling | Monel K500 Crosses |
| Monel K500 Pipe Fittings | Monel 400 Fittings |
| Monel 400/K500 Fittings | Monel 400/K500 Pipe Fittings |
| Monel 400 Seamless Pipe Fittings | Monel 400 Welded Pipe Fittings |
| Monel K500 Butt weld Fittings | Monel K500 Butt weld Pipe Fittings |
| Monel Elbow | Monel Tee |
| Monel Reducer | Monel Tube Fittings |
| Monel Pipe Fitting | Monel End Caps |
| Monel Stub End | Monel Pipe Bend |